22
PULLEYS AND LAT BAR CABLE INSTALLATION
Step 1
Insert the Lat Bar Cable (44) around the Pulley (25) at the front of the Pulley (25). Then
attach the Pulley (25) onto the Top Tube (4) with one M10 Nylon Lock Nuts (56), one
M10x70 Hex Bolts (63), two Ø10 Flat Washers (52), and two Pulley Bushings (69). Tighten
bolt and nut with two Wrenches provided.
PLEASE REFER TO THE “CABLE LOOP DIAGRAM” SECTION ON PAGE
21.
Plastic Part: Pulley:
Hardware:
Lat Bar Cable
2 Pulley Bushings
1 Nylon Lock Nut (M10)
1 Hex Bolt (M10x70)
2 Flat Washers (Ø10)
1 Pulley
2 Wrenches (19-17)
Tool:
Summary of Contents for 63130
Page 4: ...3 PARTS NUMBERS AND ILLUSTRATIONS ...
Page 22: ...21 CABLE LOOP DIAGRAM ...