30
Step 3
Pull the Pec Cable (45) downwards to the Crossed Double Floating Pulley Bracket (19).
Draw the Pec Cable (45) around the Pulley (25) on the Crossed Double Floating Pulley
Bracket (19). Then attach the Pulley (25) onto the Crossed Double Floating Pulley Bracket
(19) with one M10 Nylon Lock Nuts (56), one M10x45 Hex Bolts (61), and two Ø10 Flat
Washers (52). Tighten bolt and nut with two Wrenches provided.
Attach the Pec Pulley Rack (17) onto the right clevis of the Main Support Tube (3) with one
M10 Nylon Lock Nuts (56), one M10x65 Hex Bolts (62), and two Ø10 Flat Washers (52).
Tighten bolt and nut with two Wrenches provided.
Pull the Pec Cable (45) forwards to the Pec Pulley Rack (17). Insert the Pec Cable (45)
around the Pulley (25). Then attach the Pulley (25) onto the Pec Pulley Rack (17) with one
M10 Nylon Lock Nuts (56), one M10x45 Hex Bolts (61), and two Ø10 Flat Washers (52).
Tighten bolt and nut with two Wrenches provided.
Attach the other end of the Pec Cable (45) onto the Right Pec Arm (8) with one M10 Nylon
Lock Nuts (56), one M10x25 Hex Bolts (60), and two Ø10 Flat Washers (52). Tighten bolt
And nut with two Wrenches provided.
PLEASE REFER TO THE “CABLE LOOP DIAGRAM” SECTION ON PAGE
21.
Pulley: Hardware:
3 Pulleys 4 Nylon Lock
Nuts (M10)
8 Flat Washers
(Ø10)
2 Hex Bolts
(M10x45)
1 Hex Bolt
(M10x65)
1 Hex Bolt
(M10x25)
2 Wrenches (19-17)
Tool:
Summary of Contents for 63130
Page 4: ...3 PARTS NUMBERS AND ILLUSTRATIONS ...
Page 22: ...21 CABLE LOOP DIAGRAM ...
