7
1
2
1
2
1
2
3 REMOTE GESTION
The control unit is equipped with an integrated radio receiver with 750 code memory, on a frequency of
433.92 MHz with LIFE Rolling Code and Auto-Code coding
3.3 Deleting all of the remotes settings
3.1 REMOTE LEARNING
a) Press the button for 5” , the left green
led will turn on and then start blinking.
b) Push for 5” the button and the leds will blink
alternately
As soon as the Leds will stop blinking all
of the remotes settings will be deleted.
a) Press the button for 5” , the left green led
will firstly turn on and then will start blinking.
b) Keep on pressing the remote button until all of the
five Leds will light up the remote
setting will be deleted.
3.2 Removing an already existing remote setting
TOTAL OPENING
a) Press the button the left green Led and the
[A] Led will turn on.
b) Keep the button P1 of the radio control pressed until
all five LEDs light up
a) Press twice the button and the left green led
and the [B] Led will turn on
b) Hold down the P2 button of the radio control until
all five LEDs light up
SHTTER N°1 PEDESTRIAN OPENING
Wait for 20” or press the button again
to anticipate the exit from the programmation mode.
+
+
+
+
+
+
+
+
REMOTE CONTROL MANAGEMENT
The control unit is fitted with a built-in radio receiver with a 750 code memory and 2 channels with a
433.92 MHz frequency with LIFE Rolling Code and Auto code encoding.
- Press the key fob selection button (top left); the left green LED
under “–“ symbol and the first red dot (A) beside “– “symbol, will
light up.
- Hold down the P1 button on the transmitter that you want to
pair to perform a total opening until all five LEDS light up.
PEDESTRIAN OPENING LEAF N.1
- Press the key fob selection button (top left) twice; the left
green LED under “–“ symbol and the second red dot (B)
beside “– “symbol, will light up.
- Hold down the button on the transmitter that you want to
pair to perform a partial opening until all five LEDS light up.
Wait 20 "or press again the key fob selection button to
quit the setup mode.
REMOVE AN EXISTING REMOTE TRANSMITTER
- Press and hold the key fob selection button for 5 seconds
until the left green light under “–“ symbol comes on and
then starts blinking.
- Hold down the button on the transmitter that you want to
remove until all five LED's light up.
REMOVE ALL EXISTING REMOTE TRANSMITTERS
- Press and hold the key fob selection button for 5 seconds
until the left green light under “–“ symbol comes on and then
starts blinking.
- Press and hold the key fob selection button down again for
5 seconds and the LED’s will blink alternately.
- As soon as the flashing stops, all remotes will be
uccessfully deleted.
