Life Gear Orbi trac 28320 Owner'S Manual Download | Manualshive

Page: 17 / 27

background image

16

7. Handlebar Decorate Covers AB Installation

Remove one M8x65 Bolt (85), one M8x78 Bolt (88), two M8x38 Bolts (87), and four M8
Nylon Nuts (69) from the Handlebar Decorate Covers AB (84, 92). Remove bolts with the
6mm Allen Wrench provided.
Attach the Handlebar Decorate Covers AB (84, 92) onto the Front Post (77) with one M8x65
Bolt (85), one M8x78 Bolt (88), two M8x38 Bolts (87), and four M8 Nylon Nuts (69) that were
removed. Tighten bolts with the 6mm Allen Wrench provided.

8. Computer Installation

Remove four M5x10 Bolts (86) from the Computer (91).    Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided.
Connect the Extension Sensor Wires (97) to the wires that come from the Computer (91).
Tuck wires into the Front Post (77).    Attach the Computer (91) onto the top end of the Front
Post (77) with two M5x10 Bolts (86) that were removed.    Tighten bolts with the Multi Hex
Tool with Phillips Screwdriver provided.

Tool:

Allen Wrench 6mm

Tool:

Multi Hex Tool with Phillips Screwdriver

S13, S14, S15

«
...
15
16
17
18
19
...
»

Summary of Contents for Orbi trac 28320




























Reviews:

No comments

Related manuals for Orbi trac 28320

Brand: York Fitness Pages: 24

Elite 11.0 NTEVEL99915.1

Brand: NordicTrack Pages: 40

Brand: Weslo Pages: 16

590e Elliptical

Brand: ProForm Pages: 28

NorsK CrossPace 7.0

Brand: Hammer Pages: 30

Brand: Nautilus Pages: 42

Brand: Diadora Pages: 79

Brand: BCP Pages: 8

GOLD'S GYM STIDE TRAINER 550i

Brand: ICON Pages: 36

PRO-FORM Perspective 1000

Brand: ICON Pages: 32

Brand: PowerPeak Pages: 82

Brand: PowerPeak Pages: 69

Brand: Smooth Fitness Pages: 45

EasyFit WLIVEL86172.0

Brand: Weslo Pages: 20

Brand: Vision Pages: 116

Brand: Vivotion Pages: 29

820 PR PFEVEL7985.0

Brand: Pro-Form Pages: 14

Brand: Pro-Form Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands