GETTING TO KNOW THE BASICS
13
Remote Instruction Operating Range
The remote control can be used to control the
projector within the range shown as following
illustration.
Projector Operation
Setting Up Procedure
1.
Place the projector on a flat surface.
2.
Position the projector the desired distance from
your screen.
3.
Plug on the power cable.
When you connect the power cable to the projector,
the Power LED & Lamp Ready LED on the keypad
will be turned on to green steady light in normal
status.
Note:
The signal from the
remote control can
be reflected off a
screen for easy
operation. The
maximum remote
distance is about
10M which
including the
reflected distance.
However, the
effective
distance of
the signal may differ
due to the screen
material.
Illustration 1-9