USER’S MANUAL
B-2
Federal Communications Commission Notice
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio or
television technician for help.
FCC Warning
To assure continued FCC compliance, the user must
use grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores.
If a BNC cable is going to be used, use only a shielded
BNC (5) cable. Also, any unauthorized changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s
authority to operate this device.
Instructions to Users
This equipment complies with the requirements of FCC
(Federal Communications Commission) Equipment
provided that the following condition is met. Use the
cable, which are included with the projector or specified.