USER’S MANUAL
1-4
System at a Glance
Front View
1.
Projection
Lens
This is where the beam of light projected.
2.
Ventilation
Grills
The fan grills are where air is exchanged in and out
of the projector for internal thermal regulation.
Restricting the airflow can cause it to overheat and
turn off. If this happens, you must wait for a couple
of minutes before attempting to turn it back on.
3.
Adjusting Feet
The projector is equipped with 2 adjuster feet.
Push the adjusters to adjust its tilt angle.
1) Life the projector up and press the adjuster
button to release the adjuster.
2) The adjuster will drop into position and be
locked.
4.
Remote Control Sensor
This is where the remote control signal received.
Warning:
Do not stare directly
into the lens as
possible eye injury
could occur since
this projector
produce intense
light from the
projection lens. Be
especially careful
that children do not
look into the beam
directly.
Illustration 1-1
1
2
4
3
