Section 2 On Screen Display Menu Description
2-3
No Input Signal
“No Input Signal” will pop up on the
screen when there is no active signal
within 16 seconds.
Signal Lost
When input signal lost for 16 seconds,
the display will be blanked.
OSD Menu
You may activate the OSD menu by pressing the “Menu”
button either on the panel control of the projector or the
remote control. (More info, refer to Sec. 1)
Use the OSD
menus shown below to adjust the
projected image. To access and adjust the OSD screens
by observing following instructions:
1. Press the Menu button on the projector control
panel or on the remote control to select one of 6
on-screen menus: Status Menu, Main Menu, Setup
Menu, Color Manager Menu, Language Menu and
Utility Menu.
2. Press the arrow key of
◄
►
for main menu
selection, and use arrow key of
▲▼
for sub-menu or
for adjustment selection.
3. Press the “”Menu” button to exit.
