Liebert Static Transfer Switch 2, Installation, Operation & Maintenance Manual

Page: 57 / 150

Installation Drawings 45
Figure 27 Control Wiring for the Internal Modem Option
STATICSWITCH2/CONTROLWIRE/PS213004-01
(C
)
6/9/03
PS213004
CONTROL WIRING
COMMS BOARD
INTERNAL MODEM OPTION
STATIC TRANSFER SWITCH 2
SEE DETAIL A
J1A
COMMS BOARD
DATE
FILE NAME:
COLUMBUS, OHIO 43229 1050 DEARBORN DRIVE,
REV. NO. DWG. NO.
V CARMONA
REF. DWG. CHK BY DRAWN BY
MODEM LINE COMMUNICATIONS
TO TELEPHONE LINE
DETAIL A
CUSTOMER SUPPLIED
INTERCONNECTING
CABLE (SEE NOTES)
J1A
MANUAL FOR CONFIGURING THE INTERNAL MODEM OPTION. 5. REFER TO CONTROL CONNECTION LOCATION DIAGRAM OF SEPARATE FROM POWER WIRING. CONTROL WIRING RUNS 4. ALL CONTROL WIRING (BY OTHERS) MUST BE RUN SHOULD NOT BE COMBINED IN THE SAME CONDUIT. 3. REFER TO INSTALLATION, OPERATION & MAINTENANCE STATIC SWITCH FOR LOCATION OF COMMS BOARD. 2. WIRE SIZE AND TYPE: TELEPHONE CABLE WITH RJ-11 PLUG CONNECTOR. THE LENGTH IS LIMITED BY INTERNET STANDARDS.
AND LOCAL ELECTRICAL CODES. 6. ALL WIRING MUST BE IN ACCORDANCE WITH NATIONAL
NOTES: 1. INTERNAL MODEM OPTION MUST BE ORDERED SEPARATELY.
RJ-11 CONNECTOR
1