background image

43 

 

U.S.A.  

Technical Service and Support 

 

 

1-800-LIEBERT

 

Worldwide FAX tech support    

+614-222-5877  option #4 

Worldwide Support.   

+614-841-6755 or 1-800-222-5877 

U.K.   

+44 (0) 1628 403200 

France   

+33 (0) 1 43 60 01 77 

Germany   

+49 89 99 19 220 

Italy   

+39 02 98250 324 

Netherlands   

+31 (0) 475 503333 

E-mail   

[email protected] 

Web site   

http://www.liebert.com 

   

 

 

The Company Behind The Products

 

 
With over a million installations around the 
globe, Liebert is the world leader in 
computer protection systems.  Since it’s 
founding in 1965, Liebert has developed a 
complete range of support and protection 
systems for sensitive electronics: 

 

• 

Environmental systems: close-control air 
conditioning from 1.5 to 60 tons. 

• 

Power conditioning and UPS with power 
ranges from 250 VA to more than 1000 kVA. 

• 

Integrated systems that provide both 
environmental and power protection in a 
single, flexible package. 

• 

Monitoring and control  — on-site or remote 
— from systems of any size or location 

• 

Service and support, through more than 100 
service centers around the world, and a 24-
hour Customer Response Center. 

 

 

208 V / 240 V    60 Hz 

4 to 16 kVA 

 

Nfinity™

 Power System 

 
While every precaution has been taken to 
ensure accuracy and completeness of this 
literature, Liebert Corporation assumes no 
responsibility, and disclaims all liability  for 
damages resulting from use of this information 
or for any errors or omissions.  
 
© 2000 Liebert Corporation. All rights reserved 
throughout the world.  Specifications subject to 
change without notice.  

 

® Liebert and the Liebert logo are registered 
trademarks of Liebert Corporation.  All names 
referred to are trademarks or registered 
trademarks of their respective owners.  
 

SL-23950 (7/00) Rev. 2

 

Summary of Contents for 12 bay














































Reviews: