StoreX
Series
STX_V078.doc
28
CMa,
23.11.2009
5.
Packing and Transport
For transportation of the StoreX unit remove stackers from the climate chamber
and secure the lift assembly in its turned-in position. Always use the original
StoreX box for transportation. Do not lift the unit at the front door or at the Gate-
Assembly. Use a fork-lift when moving the instrument.
CAUTION !
The StoreX unit weights up to 100kg (200 lbs.). Use adequate equipment
for transportation and/or movement of the instrument.
Transport unit in upright position with stackers removed from the climate
chamber.
Do not use front door or Gate as handles.
When installing the instrument follow the described steps in the order given
below.
5.1
Unpacking the Instrument
•
Unpacking the instrument is best done by two people
•
Remove fastening straps and open the wooden box on the upper side
•
Remove Stackers and Foam Top
•
Open one Side of the wooden box, then the other
•
Lift the StoreX from the pallet base and carefully place it on the floor
•
Open the front door and remove the protective-wrapping from the lift
assembly
•
Remove the tape and wrapping that secures the Handler toits home
position
•
Remove Stackers and Foam Top
•
Lift the cardboard box from over the instrument
Wooden box
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
