manualshive.com logo in svg

LiCONiC StoreX Series, Operating Manual

Share
Download
LiCONiC StoreX Series Operating Manual Download Page 23

 

StoreX

 

Series

  

 STX_V078.doc 

22

 CMa, 

23.11.2009 

4.2.2 Turn 

Station 

The StoreX handler transports plates along their longer axis. Many systems 
require the plate to be presented at a rotation of 90 degrees. The Turn Station 
will rotate each plate before and after the access by the StoreX handler. 

 

 
Rotation is controlled by the StoreX system. No additional external software is 
required.  

4.2.3 Swap 

Station 

The Swap station has two transfer plates mounted on a rotation (swap-) drive. 
The swap drive rotates the two transfer plates by 180 degrees. The swap station 
acts as a plate buffer as well as a plate extension shuttle. The distance of the 
actual transfer position is increased by 145 mm. 

The swap station is controlled by the user system. The swap station is accessed 
through the handling communication port. The StoreX system monitors possible 
conflicts with the StoreX handler and the Swap Station. 

The swap station has two integrated plate sensors. Both sensor statuses can be 
requested individually. 

 

Transfer Station 
Rotation Drive 

Swap Drive

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for StoreX Series


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands