Cabling
Cabling with splitbox(es):
Connect the Mix4-6 with the splitbox via a 5pin DMX cable. The two 5pin outputs of the
splitbox can be used to connect further splitboxes. On DataPower output of the Splitbox
the devices can be plugged, also in a daisy chain. Observe the maximum number of
devices. Connect the mains cable.
Distribute the load evenly over the 4 outputs.
Maximum number of devices per splitbox:
It is surely possible to mix the devices. The maximum power of 120W (PS104) respectivly
240W (PS204) must be observed. The power consumption of every device is indicated on
the type plate. The total power consumption per Power supply is the sum of the single
power consumption of the devices.
6
Mix4-6 Rev.: 1.02
Mains input
DMX 5pol
XLR
Data line
Mix4-6
Licht-Technik
devices
DMX 4pol XLR
DataPower
line
Mains
switch
Connector for further Splitbox (5pol XLR Data line) Also without
mains power!
IN
OUT
Second output only
with mains supply
Device
Current
Number at PS204 (20 A)
Number at PS104 (10A)
total
per output
total
Color changer
1,2 A
16
4
8
Dimmer shutter
1,2 A
16
4
8
2,5 A
8
4
4
Motor yoke
4,0 A
4
1
2
MagVader (Color changer and
shutter)
