C. INSTALLATION
WARNING:
FOLLOW THE MOUNTING INSTRUCTIONS CAREFULLY.
A FAULTY INSTALLATION MAY CAUSE SERIOUS INJURIES!
• Before proceeding with the installation, remove all unnecessary packages and disable any
unused equipment ;
• Make sure that the door can be easily opened and closed manually and check that it is in good
mechanical condition and properly balanced;
• Fix the garage door opener so that the emergency release rope can be reached at an height
lower than 1,8m from the floor;
• Install any automation system permanent controls within the door sight range but far enough from
any moving part and at a minimum height of 1,5m;
• Affix, in outstanding position or near the permanently mounted controls, warning signals
indicating the risk of being caught in the door movement;
• Clearly indicate the emergency release system;
• Once you have completed the installation, make sure that the mechanical structure is properly
adjusted and check that door reverses the closing movement when detecting any obstacle
higher than 40cm from the floor;
• Make sure that the door movement does not hinder public roads or footpaths;
• Make sure that the garage door opener stops any opening movement when a minimum load of
20 Kg is centrally fixedon the bottom edge of the door;
REQUIRED TOOLS
WARNING
3
GB
GB
