manualshive.com logo in svg

LI-COR LI-7500, Instruction Manual

Share
Download
LI-COR LI-7500 Instruction Manual Download Page 11

Section 1

Introduction

1-3

●

Power Cable - (part #392-05619). 4m cable used to connect the LI-7500 to your 10.5-
30VDC power supply.

●

SDM Interface Cable - (part #392-05618). Used to connect the LI-7500 in a
Synchronous Device for Measurement (SDM) loop, such as those used by Campbell
Scientific data recording devices.  Longer cables can be ordered from Turck Inc. (see
Appendix C).

●

Analog Input Cable - (part #392-05621).  Used to connect external temperature and/or
pressure transducers to the LI-7500.  See Calibration Section 4 for details.

●

DAC Output Cable - (part #392-05622).  Used for DAC outputs from the LI-7500.

●

LI7500 Data Communications Software - (part #7500-50). This Windows

®

 95/98/NT

compatible software allows your computer to communicate with the LI-7500.  The
software is provided on CD.  A complete description of this software can be found in
Section 3, Setup and Operation.

●

Calibration Accessory  - (part #9975-012).  Contains a calibration tube required for
setting the zero and span of the LI-7500.  Complete calibration instructions can be found
in Section 4.

Summary of Contents for LI-7500




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands