manualshive.com logo in svg

LI-COR li-6262, Instruction Manual

Share
Download
LI-COR li-6262 Instruction Manual Download Page 67

FCT 40-45

5-22

System Software

40  Miscellaneous

40 ** MISC **

↑

,

↓

,

↵

Enters menu at function 40.

41-44  Temperature and Auxiliary

Press 

FCT

, followed by the appropriate code, to view the temperature and

auxiliary channel codes.  These channels can only be viewed by pressing

FCT

; they are not executable from the main menu.

Code

Description

41

Temperature mV

42

Temperature 

°

C

43

Pressure (kPa)

44

Auxiliary mV

NOTE

:  Pressure (kPa), FCT 43 is used for computations.  This comes from

FCT 77, or an analog signal at FCT 44 (see Section 6.4).

45  Timer

Timer                              3.7

Displays accumulated time in
seconds from instrument start-
up.

The Timer acts as a counter which accumulates the number of seconds since
instrument start-up (to 999,999), or since the Reset Timer function (FCT 18)
was last executed.

The Timer can also be viewed by entering "45" into any of displays 1 to 9
(FCT 91-99).  The Timer function can be output to a computer or printer by
entering "45" into the Set Print List function (FCT 13).

Summary of Contents for li-6262
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands