manualshive.com logo in svg

LI-COR li-6262, Instruction Manual

Share
Download
LI-COR li-6262 Instruction Manual Download Page 53

FCT 07-08

5-8

System Software

07  Backlight ON/OFF

BACK LIGHT=NO

↑,↓,↵

YES or NO.

Press 

↑

 or 

↓

  to toggle the LCD display backlight on or off.  Change if

desired, depending on the lighting conditions in your work area.  Continuous
use of the backlight may slightly reduce battery operation time.

NOTE:

  If FCT 07 is executed from the main menu, the backlight

condition does not change until you exit the menu.

*07Y 

(Yes)

 

or

 *07N 

(No)

.

08  Test Menu

DISPLAY Test

↑

,

↓

,

↵

Scrolls through display test
menu.

While most of the items in the Test Menu are for technician use, there are a
few items of interest to many users.

The KBD (Keyboard) Test

  prompts to press any key; each of the 16 keys

should display correctly when pressed.

The D/A (Digital-to-Analog) Test

 is used to test the digital to analog

conversion capabilities of the LI-6262.  Enter a value (in volts), to be output
to channel 1 or 2, which can be measured with a metering device.

DA1:

0.0

NEW= __

Prompt for digital to analog
conversion value (in volts).

Summary of Contents for li-6262
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands