ii
Federal Communications Commission
Radio Frequency Interference Statement
This instrument generates and uses radio frequency energy and if not installed and used
properly, that is, in strict accordance with these instructions, may cause interference to
radio and television reception. This equipment is required to comply with the limits for a
Class 'A' computing device pursuant to Subpart J of Part 15 of the FCC rules. A Class 'B'
device is designed to be used in a residential area. Class 'A' specifications are designed to
provide reasonable protection against such interference in a commercial environment.
This equipment has been type tested and found to comply with the limits for Class 'A'
computing devices, and is verified in accordance with FCC Part 15 Subpart J for the Class
'B' limits for a computing device. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to radio or
television reception that can be determined by turning the instrument off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
1. Reorient the receiving antenna.
2. Relocate the instrument with respect to the receiver.
3. Plug the instrument into a different outlet (if so equipped) so that the instrument and
receiver are on different branch circuits.
If necessary, the user should consult LI-COR or an experienced radio/television technician
for additional suggestions.
The Federal Communications Commission has prepared a booklet entitled "How to
Identify and Resolve Radio-Television Interference Problems" which may be helpful to
you. This booklet (stock # 004-000-00345-4) is available from the Superintendent of
Documents, U.S. Government Printing Office, Washington, D.C. 20402.
