background image

19

18

Factory pre-set speed steps:
7, 9, 11, 13, 16, 20, 24, 28, 32, 36, 42, 48, 54, 60, 68, 76, 84,
92, 102, 112, 124, 136, 152, 168, 188, 208, 230, 255
Pre-set values for user-programmable speed steps:
8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128, 
136, 144, 152, 160, 168, 176, 184, 192, 208, 224, 240, 255

Hint: The speed steps are factory pre-set and programming 
is not necessary. We recommend the 55045 MTS PC 
Decoder Programming Module for programming.

Example for Bit programming: a loco shall run in reverse 
direction with user-programmed speed steps, analog 
operation shall be possible:
Bit 1 = 1, Bit 2 = 0, Bit 3 = 4, Bit 4 = 0, Bit 5 = 16, 
Bit 6 = 0. 1+4+16=21. 
Thus, program CV 29 to function value 21.

General programming procedure
with 55015 Universal Remote:

- Registers CV1 through CV4 can be

programmed directly by program-
ming the desired function value in
the register.

- To program higher CVs:

- In register CV6, input the number

of the register you want to program.

- Then input the desired function

value in register CV5.

Example:

Set hand-over function to ON (pro-
gram register CV54 to function value
3).
To program:
- Display shows “P --”
- Select register CV6 (press 6).
- Input 54 (register you want to pro-

gram).

- Execute programming (press right

arrow button).

- Display shows “P --”
- Select register CV5 (press 5).
- Input 3 (selected function value)
- Execute programming (press right

arrow button).

When programming with the 55045,
all function values are programmed
directly.

AUTHORIZED SERVICE

Improper service will void your war-
ranty. For quality service, contact
your authorized retailer or one of the
following LGB factory service sta-
tions:

Ernst Paul Lehmann Patentwerk

Reparatur-Abteilung
Saganer Strasse 1-5
D-90475 Nürnberg
GERMANY
Telephone: (0911) 83707 0
Fax: (0911) 83707 70

LGB of America

Repair Department
6444 Nancy Ridge Drive
San Diego, CA 92121
USA
Telephone: (858) 795-0700
Fax: (858) 795-0780
You are responsible for any shipping
costs, insurance and customs fees.

Hint:

Information on LGB products

and LGB representatives around the
world is available online at
www.lgb.com

CAUTION! 

This model is not for chil-

dren under 8 years of age. This
model has small parts, sharp parts
and moving parts. The locomotive
drive rods can pinch and bind. Save
the supplied packaging and instruc-
tions.

Products, specifications and avail-
ability dates are subject to change
without notice. Some products are
not available in all markets and at all
retailers. Some products shown are
pre-production prototypes. LGB,
LGB of America, LEHMANN and the
LGB TOYTRAIN logotype are regis-
tered trademarks of Ernst Paul
Lehmann Patentwerk, Germany.
Other trademarks are the property of
their owners. © 2003 Ernst Paul
Lehmann Patentwerk.

Summary of Contents for 23440














Reviews: