LG XD3 15 Series Owner'S Manual Download

Page: 12 / 56

Accessories (On Some Models)

Funnel

(All models)

Noise Strip

(Lower - 1EA / Front

- 1EA / Side - 2EA)

Cover Felt

Moisture Barrier Tape

(Aluminum Tape)

Preparing Cabinet Opening

Min. 600 mm

820 - 870 mm

100 mm

600 - 605 mm

Flat and

stable area

75 mm

•

Cut out for hoses and electrical cables on

either side. (Approximately 100 mm X 75 mm)

•

Select a location as close to the sink as

possible for ease of connection to the water

and drain pipes.

•

To ensure drainage, the appliance should not

be installed more than 1 meter away from the

sink.

•

If the appliance is installed in a corner, allow

minimum clearance of at least 50 mm

between the appliance and an adjacent

cabinet or wall.

•

Before sliding the appliance into the

installation opening, all necessary height

adjustments should be made using a spanner.

CAUTION

•

Any bare wood surrounding the appliance

should be sealed with a waterproof paint or

sealant to prevent it from swelling.

•

Slide the dishwasher into the cabinet, opening

carefully. Make sure that the drain hose

behind the machine and inside the cabinet is

not kinked or stretched.

•

Install the appliance on a flat and stable area.

Do not place any objects in-between the floor

and base or leg off the appliance.

NOTE

•

This installation must be conducted by

qualified service personnel to ensure it has

been installed correctly.

•

Do not pull or lift the appliance using the

handle; dosing so can damage the door and

hinges. Open the door and grab the body

frame and the top front opening of the tub to

move or lift the appliance.

•

Do not push the door of the dishwasher with

knees.

Summary of Contents for XD3 15 Series

























































Search results

Summary of Contents for XD3 15 Series

Reviews:

Related manuals for XD3 15 Series

Brands by name

Popular brands

LG XD3 15 Series, Owner'S Manual

Search results

Summary of Contents for XD3 15 Series

Reviews:

Related manuals for XD3 15 Series

Brands by name

Popular brands