35
EN
Possible plate size according to the upper
rack position
Upper
Rack
Position
Plate Size (mm)
Upper Rack
Lower
Rack
with
Cutlery
Rack
without
Cutlery
Rack
Upper
165
215
300
Middle
193
243
272
Lower
221
271
244
WARNING
•
Before adjusting, ensure the rack is empty of
all dishes. Otherwise dishes may get
damaged or you may get injured.
NOTE
•
Before pushing the upper rack into the
appliance, ensure the rack height is the same
on both sides. If the height is not the same on
both sides, the appliance door will not shut
and the upper spray arm will not connect to
the water inlet.
•
Raise the upper rack without pushing the
buttons on each side. Pushing the buttons
when raising the rack will prevent the rack
from locking into position.
•
To set the rack to the middle position, it may
be easier to lower the rack all the way down
and then raise each side of the rack
individually until it clicks into place.
•
There is a 56 mm gain in height when the
upper rack is moved to the lower position.
•
After adjusting the rack levels, check that the
spray arms are free to rotate.
•
With the lower position of the upper rack,
check if the bottom part of upper rack
including spray arm is not disturbing items on
the lower rack.
•
When the upper rack is in the lower position,
push in the upper rack first, and the lower
rack later.
•
Pull out the lower rack first, and the upper
rack later.
•
Raise the upper rack without pushing the
buttons on each side. Pushing the buttons
when raising the rack will prevent the rack
from locking into position.
•
When the upper rack is in the lower position,
the possible height of dishes differs with
models where the cutlery rack is fitted.
Summary of Contents for XD3 15 Series
Page 56: ......
