48
EN
Cleaning the Water Supply
Hose Filter
1
Unplug the appliance.
2
Turn off the water tap.
3
Unscrew the water supply hose.
4
Remove the seal and the plastic filter with a
pair of small pliers or scissor grips.
5
Refit the filter and gasket and make sure
that it is sitting correctly.
6
Refit and secure the water supply hose in
reverse order. Do not use any mechanical
device to tighten the hose. A soft cloth can
be used to assist hand tightening.
NOTE
•
A filter is fitted into the inlet of the water
supply hose connection.
•
If insufficient water flows into the appliance,
check that the filter is not blocked.
•
If there is a leak, the water supply hose will
need to be checked for proper connection.
•
Never over tighten the water supply valve or
use mechanical devices to tighten.
•
When reassembling the seal and the filter,
ensure that they free from dirt or grit that may
have come from the water supply.
Summary of Contents for XD3 15 Series
Page 56: ......
