54
EN
Error Codes
Problem
Possible Cause
Solutions
Water inlet problem.
•
Check for a clogged, kinked or frozen
water supply hose.
•
Check water supply.
Drainage Problem.
•
Check for a clogged, kinked or frozen
drain hose.
Waste spigot is clogged.
•
Remove knockout on waste spigot.
Filters are clogged.
•
Clean Filters.
Oversudsing caused by
improper detergent, such
as liquid dish soap.
•
Do not use hand dishwashing liquids.
Only use detergents which are designed
for use in automatic dishwashers.
•
To remove detergent residue in the tub,
pour approximately 100~200 mℓ of milk
into a shallow bowl, place it to the upper
rack and then run the appliance on the
Auto
cycle.
Failure to level appliance.
•
Make sure that the appliance is properly
leveled.
Excessive Water supplied.
•
Call for service if the same problem
occurs again.
Water leakage problem.
Heater circuit failure.
Thermistor failure
Motor trouble
Vario motor trouble
Summary of Contents for XD3 15 Series
Page 56: ......
