LG XD3 15 Series Owner'S Manual Download

Page: 47 / 56

WARNING

•

Be cautious of sharp edges when handling the

stainless steel filter.

CAUTION

•

After using the appliance, particles of food are

filtered by the filters. Any unremoved food

residue may cause bad smell. In addition,

drainage may have a problem due to food

residue stuck in the filters.

NOTE

•

When assembling, rotate it firmly until it clicks.

Cleaning the Spray Arms

If the spray arm holes are blocked by any food

residue, dishes may not be cleaned well due to

improper water spray.
It is recommended that the spray arms be

cleaned once every two weeks.

Cleaning the Lower Spray Arm

Make sure that the water jet holes are not

blocked by food particles.

If any food residue blocks the spray arm

holes, remove it with a pin or any sharp

tool.

CAUTION

•

To avoid breaking the variable angle spray

arm end sections, do not pull or manually

rotate them.

Summary of Contents for XD3 15 Series

























































Search results

Summary of Contents for XD3 15 Series

Reviews:

Related manuals for XD3 15 Series

Brands by name

Popular brands

LG XD3 15 Series, Owner'S Manual

Search results

Summary of Contents for XD3 15 Series

Reviews:

Related manuals for XD3 15 Series

Brands by name

Popular brands