80
PIPING AND WIRING FOR OUTDOOR UNIT
ENGLISH
Step 2. : Connect power cable to main power terminal
See below figure for detailed information. When connecting earth cable, the diameter of
cable should be refer to the below table. The earth cable is connected to the Control
box case where earth symbol is
marked.
Step 3. : Use cable clamps (or cord clamps) to prevent unintended move of power cable.
Step 4. : Reassemble the side panel to the unit by fastening screws.
Failure to do these instruction can result in fire, electric shock or death.
• Make sure the power cable do not touch to copper tube.
• Make sure to fix [cord clamp] firmly to sustain the connection of terminal.
• Make sure to connect unit power & heater power separately.
UNIT POWER
LOW VOLTAGE
CODE CLAMP
UNIT POWER
LOW VOLTAGE
CODE CLAMP
U3 (1Ø : 12, 14, 16 kW)
U3 (3Ø : 12, 14, 16 kW)
Summary of Contents for THERMA V
Page 276: ...276 ENGLISH ...