206
INSTALLER SETTING
ENGLISH
Segmentation
Functions
Description
Room
Cooling
Cooling temp. setting
At the leaving water control in cooling mode, the
control reference water temperature position
setting
Air cooling set temp.
Adjusting range of 'Setting Air Temperature' in
cooling mode
Water cooling set temp.
Adjusting range of 'Setting Leaving Water
Temperature' in cooling mode
Water supply off temp.
during cooling
Determine leaving water temperature when the
unit is turned off. This function is used for
preventing condensation on the floor in cooling
mode
Hysteresis Cooling Water
Cooling Water Outlet Temperature Hysteresis
range setting
Hysteresis Room Air
(Cooling)
Cooling air temperature Hysteresis range setting
Pump setting in cooling
Set water pump on / off delay option in cooling
mode
Auto mode
Seasonal auto temp
Set the operating temperature in Seasonal Auto
mode
Domestic
hot water
DHW set temp.
Setting DHW set temperature
Tank disinfection setting 1
Setting start/maintain time for pasteurisation
Tank disinfection setting 2
Setting pasteurisation temperature
Tank setting 1
Setting start temperature for operation
Tank setting 2
Setting maintain temperature for operation
Heater priority
Determine electric heater and water heater on and
off
DHW time setting
Determine follow time duration : operation time of
domestic hot water tank heating, stop time of
domestic hot water tank heating, and delay time of
DHW tank heater operating
Solar
thermal
Solar Thermal System
Function to set operation reference value in Solar
Thermal System.
Service
Pump test run
Water pump test run
Frost Protection Temp.
This function prevents the product from freezing.
Summary of Contents for THERMA V
Page 276: ...276 ENGLISH ...