15
ENGLISH
5. PRODUCT BRING-IN/MOVING
5-1. Precautions for bring-in
Inspect if the size of the entrance is big enough for the product in advance by checking the size and weight of the
product when bring in the product, and prepare for a proper transportation equipment and method for the product
weight and size after checking environment conditions of the site.
Secure the minimum required entrance for bring-in and be careful not to damage the product when delivering the
product.
The measurement in Table 3 is the reference information about the standard model of LG Electronics. Make sure to
check the approved drawing for the product measurement to enter. Proceed with installation after consulting with LG
Electronics or the agency that LG Electronics approved for the condition of the site.
!
WARNING
Bringing-in the product in disassembled parts and assembling it should be implemented under the supervision
of LG Electronics or the agency that LG Electronics approved.
Otherwise, LG Electronics does not take any responsibility for the problems happened.
a
b
c
d
e
f
Figure 5. Product Bring-in
Table 3. Minimum entrance (door) dimensions
(Unit : mm)
Location
A
B
C
D
E
F
100RT
2,750
2,140
2,600
2,430
994
1,984
200RT
3,860
2,600
3,100
3,004
1,428
2,434
300RT
4,450
2,600
3,100
3,650
1,428
2,434
Summary of Contents for RCWFL Series
Page 40: ...40 ENGLISH 3 Control panel wiring diagram ...
Page 41: ...41 ENGLISH 3 Control panel wiring diagram ...
Page 42: ......