manualshive.com logo in svg

LG LIP-6812, Installer'S Manual, Page: 39 / 136

Share
Download
LG LIP-6812 Installer'S Manual Download Page 39

LIP-6812 & LIP-6830 

 

Installer Guide 

33 June, 

‘07

 

2)  Press      button, or move cursor to 

2.SIP Configuration

 using the 

[Next]/[Prev]

 Softkeys, 

and press the 

[ OK ]

 Softkey.  

3)  Press     button, or move cursor to 

4.Outbound Proxy Port 

using the 

[Next]/[Prev]

 

Softkeys, and press the 

[ OK ]

 Softkey. 

4)  Input the Outbound Proxy Port for the LIP-6812/LIP-6830 using the dial pad. 

 
5) Press 

the 

[ OK ]

 Softkey to save your Configuration. 

6)  Press the                 button to exit from the menu. 

 

 

Changing the Outbound Proxy Port requires a reboot of the LIP-6812/LIP-6830; when 
you leave the menu, you will receive a Reboot notice. 

 

3.5.2.3  Backup Proxy Address 

When an Outbound Proxy is employed to receive SIP requests, a backup Proxy server can be 
defined for use should the primary proxy fail to respond; the Backup Proxy Address can be 
defined as an IP address or a FQDN. 
 
To assign a Backup Proxy Address: 
1)  Press the              button.  If the LCD Menu is locked, use the unlock procedure (refer to 

Section 

 3.3

 Lock/Unlock Configuration). 

2)  Press      button, or move cursor to 

2.SIP Configuration

 using the 

[Next]/[Prev]

 Softkeys, 

and press the 

[ OK ]

 Softkey.  

3)  Press     button, or move cursor to 

5.Backup Proxy Address 

using the 

[Next]/[Prev]

 

Softkeys, and press the 

[ OK ]

 Softkey. 

4)  Input the Backup Proxy address for the LIP-6812/LIP-6830 using the dial pad. 

 
5) Press 

the 

[ OK ]

 Softkey to save your Configuration. 

6)  Press the                 button to exit from the menu. 

 

 

Changing the Outbound Proxy Port requires a reboot of the LIP-6812/LIP-6830; when 
you leave the menu, you will receive a Reboot notice. 

Backup Proxy Address [1]

100.1.1.1 

 

[ 

»

 ] [Mode] [ OK ]

 

¼

 

Outbound Proxy Port 

5060 

 

[ 

»

 ] [CLR ] [ OK ] 

 

Summary of Contents for LIP-6812









































































































































Reviews:

No comments