Note
• Packet communication can be connected,
even when Wi-Fi function is ON. However,
while Wi-Fi is available, Wi-Fi is prioritized.
When the Wi-Fi network is disconnected,
this terminal automatically connects to
the LTE/3G/GPRS network. Note that
if you keep connecting via the LTE/3G/
GPRS network, you may incur packet
communication charges.
• You can reduce battery consumption by
turning OFF Wi-Fi when you are not using it.
Wi-Fi network status
When this terminal is connected to a Wi-Fi
network,
appears in the status bar. An open
network with no security protection is detected
when Wi-Fi network notification is set to ON,
always
appears in the status bar.
Connecting to a Wi-Fi network
From the Home screen,
X
"Settings"
X
"Wi-Fi"
• The "Wi-Fi" screen appears.
Turn "Wi-Fi" ON
Tap the Wi-Fi network that you want
to connect to
• If you try to connect to a protected Wi-Fi
network, you will be prompted to enter the
security key for that Wi-Fi network. Tap
the "Password" box, enter the network
password and tap "Connect".
• Usually, when you enter a password,
the last character entered is displayed
and as many "・" as the number of
characters appear instead of previously
entered characters. All characters can be
displayed when you place a check mark
on "Show password".
• When connecting to an access point that
supported WPS, place a check mark in
"Show advanced options" and select a
connection method.
57
Confirmation and Settings before Using
