Function
30
1. Press the
MENU
button and then use
,
button to select the menu.
2. The used lamp time is displayed.
l
When projector lamp is reaching the end of its life, the lamp indicator will turn
red. (Refer to the page 10.)
l
The lamp warning LED illuminates red continuously in the case of excessive
lamp time.
l
Press the
MENU
button twice or the
EXIT
button to exit the menu screen.
Checking lamp time
1. Press the
STILL
button of remote control.
* You can freeze the input image.
2. To exit STILL, press any button .
* The STILL function will release automatically after approximately 10 minutes.
Using Still Function
<Moving Image>
<Still Image>
1. Press the
MENU
button and then use
,
button to select the menu.
2. Press the
,
button to select
Monitor Out
item.
3. Press the
,
button to select
RGB1, RGB2
or
Auto
.
l
Press the
MENU
button twice or the
EXIT
button to exit the menu screen.
l
Auto mode is the mode to output an image of currently seeing input among
RGB1 or RGB2 input.
Using Monitor out Function
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
MENU
Prev. Move Select
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
* You can select either of the two RGB inputs.
MENU
Exit Move OK
