Function
28
To select a background image
To initialize keystone
To use keystone function
1. Press the
KEYSTONE
button on the remote control.
2. Press the
,
button to select a item.
1. Press the
KEYSTONE
button on the remote control.
2. Please select a
Background
image by
,
button.
3. Please select desiring item by
,
button.
l
If there ’s no input signal,it is possible to adjust
keystone by using the adjusting pattern.
1. Press the
KEYSTONE
button on the remote control.
2. Please select keystone initialization by
,
button.
3. Press the
OK
button.Keystone adjusting figure
returns
to the
factory
price.
H
0
Keystone
Background
Keystone reset
Top left
Bottom
Top
Right
Left
Top left
Top right
Bottom left
Bottom right
3. Press the
,
button to select the item (H or V)you want,
and press the
,
button to adjust it.
l
You can adjust each item from 0 to 100.
l
The default value may change depending on input mode.
l
You can also use this function by using the
MENU
button.
l
Press the
MENU
button to exit the menu screen.
1. Press the
BLANK
button.
l
The screen turns off to a background color.
l
You can choose the background color.
(Refer
to
‘Selecting blank image color’
)
2. Press any button to cancel the blank function.
l
To temporarily turn off the lamp, press BLANK on the remote control. Do not block the projection lens with
any objects when the projector is under operation as this could cause the objects to become heated and
deformed or even cause a fire.
Using Blank Function
* This function may be effective if you need to get the attention of the audience during presentations, meetings or briefings.
MENU
Exit Select
Signal
V
MENU
Exit Select
Background
Keystone reset
Signal
Signal
V
MENU
Exit
OK
Background
Keystone reset
Signal
Signal
Press OK Key
