Ceiling Concealed Duct
20
_
Inverter 50Hz/R410A
Part 2 Product Data
n
Damper Controller(PBZC80)
- Open the cover of indoor unit control box and damper controller(Figure 1)
- Assemble the damper controller on the cover which is seperated.
- Connect the lead wires between main PCB and damper controller.(Figure 2)
- Connect the main power cable and actuator cable to damper controller.(Figure 2)
- Assemble the damper controller to indoor unit and then assemble cover of damper controller.
- Check the slide switch position, it should be located “1” position.
- Refer to damper controller Installation manual for detailed installation metheod.
Damper controller
Power
Cable
Actuator #1
Actuator #2
Indoor
PCB
Actuator #5
Actuator #4
Actuator #3
Actuator #6
Actuator #7
Actuator #8
Figure 1
Figure 2
CN-PTC
CN-DAMPER
NOTICE
When install Damper Controller, The Remote controller Should be matched as following table
If There is a mismatched usage such as PDRCUDC0 and PBDC40, The unit can have improper operation
No.
Model name of Damper Controller
Model name of Remote controller
Remark
1
PBZC80
PDRCUDC0
2
PBDC40
PDRCUDB0
1. Installation
