Ceiling Concealed Duct
12
_ Inverter
50Hz/R410A
Part 3 Design and installation
1. Installation
4) Two Wired Remote Controller
• All wired remote controlles are displayed on identical information.
• Last used wired remote controller has priority on product's movement.
• Set one wired remote controller as master,the others as slave.<Figure 1>
• The thermistor mode is operated by the wired remote controller set as "master"
GND(Black)
12V(Red)
Signal(Yellow)
GND(Black)
12V(Red)
Signal(Yellow)
MASTER
SLAVE
Remote Controller
Group Control
S/W GR
1
1. Master
2. Slave
2
<Figure 1>