64
206-4317 Draft A.2
Reference: Using the TV Zoning Feature (Cont.)
Note:
While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one
Zone. See also the FTG Channel Map Editor overview on page 45.
At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may
opt to place Zone restrictions on selected channels in the FTG Channel Map, but at the same time, you can
choose to con
fi
gure all TVs at the site with the same Installer Menu and/or Setup Menu settings. For
example, an FTG Con
fi
guration (.tlx)
fi
le being used to con
fi
gure the TVs at a site may contain multiple
Installer Menu and Setup Menu pro
fi
les with different Zone assignments, as well as an FTG Channel Map
with Zone restrictions on several channels. Each TV that still has the default TV Zone 0 setting will
only
be
con
fi
gured by the Installer Menu and/or Setup Menu pro
fi
le(s) with a Zone 0 designation. If, on the other
hand, the TV Zone # is set to 1, the TV will
fi
rst look in the
fi
le for the LV570H Installer Menu and/or Setup
Menu pro
fi
le(s) with a Zone 1 designation. If none of the LV570H Installer Menu and/or Setup Menu
pro
fi
les has a Zone 1 designation, the TV will then look for the LV570H pro
fi
le(s) with a Zone 0 designation.
For the FTG Channel Map con
fi
guration, when the TV Zone # is set to 0, the TV will ignore any Zone
restrictions (1–8) that may be placed on channels in the FTG Channel Map. However, when the TV Zone #
is set to 1, the TV will omit any channels that have been restricted from Zone 1 in the FTG Channel Map.
Using the TV Zoning Feature with Cloning Con
fi
guration
A location-speci
fi
c con
fi
guration / Clone (.tlx)
fi
le may be saved (exported) from a Master TV and then be
used to con
fi
gure Target TVs. For example, if the TV Zone # in the Master TV is set to 3 before the Clone
fi
le export is initiated, the Master TV’s Installer Menu and Setup Menu pro
fi
les will be saved with the TV
Zone 3 assignment. In order to con
fi
gure the Target TVs with the Zone 3 Installer Menu and Setup Menu
pro
fi
les exported from the Master TV, you must set the TV Zone # accordingly in the Target TVs before
importing the Clone
fi
le. See “Set the TV Zone # in the TV” below. Also, see “Cloning Procedures” on
pages 37 to 40 for additional information on the cloning processes. TV Zone 0 is the default TV Zone #.
Set the TV Zone # in the TV
You can set the TV Zone # in the EZ-Manager Wizard (see “EZ-Manager Wizard” on pages 12 to 19)
or, if the TV is in Pass-through Mode, via the TV’s setup menus as described below. Note that the follow-
ing procedure can only be performed while the TV is in Pass-through Mode. You will also be able to specify
a Label (North, South, East, West) and Room Number for this TV, if desired.
1. Turn ON the TV.
2. Press
MENU SETTINGS
on the Installer Remote, and use the arrow navigation keys to select/highlight
the
OPTION
menu option. Then, press
OK
.
3. Use the Up/Down arrows to select
Zones & Room Number
, and then press
OK
.
4. In the Zone, Label, and Room Number pop-up window, complete the appropriate
fi
elds as described
below. Use the Left/Right arrow keys on the Installer Remote to navigate between each of the
fi
elds.
• Zone: Enables you to set a TV Zone # so that the TV can be con
fi
gured with Installer Menu and/or
Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or Setup Menu
settings may be provided in a Clone/Con
fi
guration (.tlx)
fi
le. If the TV is being con
fi
gured for FTG Mode
via CPU, the TV Zone # setting also allows the TV to omit channels that have been restricted in the
FTG Channel Map (see “FTG Channel Map Zone Restrictions” on previous page).
(Continued on next page)
