38
206-4317 Draft A.2
Cloning Procedures (Cont.)
(Continued from previous page)
6. Use the Up/Down arrow keys to select
Export Clone File
, and then press
OK
.
7. In the Export Clone File window, to differentiate this Clone
fi
le from other LV570H Clone
fi
les,
you can use the Up/Down arrow keys to change the last
fi
ve digits of the
fi
lename. Press
OK
when you are ready to continue.
Export progress will be shown in a new window. Do NOT remove the USB device while
exporting is in progress. When the export process is complete, the TV Manager will reappear
on the screen.
8. Press on the Installer Remote to exit the TV Manager, and remove the USB memory device
from the Master TV.
Note: If the Master TV has a channel lineup, during the export process, logical channel
numbers are automatically assigned in ascending order, starting with 0 (zero), to the
physical RF channels of the TV channel lineup to create an FTG Channel Map. See also
note below.
Note: If the exported Clone file is to be used for FTG Mode via CPU configuration (i.e.,
it contains an FTG Channel Map), it is highly recommended that you open the file in
the FTG File Manager—BEFORE transferring (importing) the file to any Target TVs—to
verify FTG Channel Map and FTG Installer Menu settings. This will also enable you to
confirm channels and add channel attributes, labels, etc.
Importing a Clone File
This section describes how to transfer (import) a Clone or FTG Con
fi
guration (.tlx)
fi
le from a USB
memory device to a TV using the TV Manager “Import Clone File” option. The “.tlx”
fi
le may be
created either from a Master TV Setup that was saved (exported) from a Master TV or in the FTG
File Manager.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• Avoid using special characters, such as ?, &, @, etc., in the Clone/Con
fi
guration (.tlx)
fi
lename.
• If the EZ-Manager Wizard appears on the screen when you turn ON the Target TV, you can use
the wizard’s “USB Con
fi
guration” option to access the TV Manager and complete the import
procedure (see “TV Con
fi
guration Options” and/or “USB Con
fi
guration” on pages 13 and 18,
respectively, as necessary).
• You may also use the Ez Download utility to import the Clone/Con
fi
guration (.tlx)
fi
le. See “Ez
Download Utility” on pages 20 to 22 for further information.
• If the Target TV is currently in Pass-through Mode and you intend to use the TV Zoning feature—
i.e., the Clone/Con
fi
guration (.tlx)
fi
le you are importing contains an FTG Channel Map and/or
FTG pro
fi
le(s) with TV Zone assignments—make sure to assign the appropriate TV Zone # in the
TV when directed to do so in the procedure below. See Reference section, “Using the TV Zoning
Feature,” for further information.
• If you would like the Target TV(s) to remain in Pass-through Mode after the Clone/Con
fi
guration
(.tlx)
fi
le is imported, ensure the “.tlx”
fi
le does not contain an FTG Channel Map; otherwise, the
import procedure will result in the Target TV(s) being con
fi
gured for FTG Mode via CPU.
(Continued on next page)
