1. Introduction
1.3 Caution
Please follow the guidelines for efficient and safe usage of COB LED as below.
Storage
1) LG Innotek LED must be stored under the above conditions.(JEDEC MSL : 2a)
2) To minimize moisture absorption into the products during the transportation and
storage, the products must be packed in a vacuum sealing bags.
3) If a unused LEDs remain, they should be stored in hermetically sealed
container with desiccants (silica gel).
4) If baking is required, devices must be baked (i.e in a dry oven) for 10 ~ 24 hours
at 65
℃
±
5.
5) The LED should avoid direct contact with hazardous materials such as sulfur,
chlorine, phthalate, etc…
The silver-plated metal part on LEDs can be rusted when exposed to corrosive
gases. The corrosive atmosphere must be avoided during the use and storage.
Due to possible sulfurization of silver-plated metal, LED should not be used and
stored together with oxidizing substances made of materials in a following list,
: solder cream, plain paper, rubber and so on.
Electrical
1) The current to the each LED must not exceed the absolute maximum
rating when design the circuits.
2) This product should be operated in forward bias.
3) For outdoor use, necessary precautions should be taken to prevent water,
moisture and salt air damages.
Conditions
Temperature
Humidity
Duration
Storage
Before Opening
Sealing Bag
＜
30
℃
＜
50%RH
within 1 Year from
Delivery Date
After Opening
Sealing Bag
＜
30
℃
＜
60%RH
≤ 672 hours
Baking
65
±
5
℃
＜
10%RH
10 ~ 24 hours
7
JEDEC Standard MSL : 2a
