Installation Instructions
SKU# 260412 ( LD-F59469S-SI )
Rated Voltage
230-240V~ 50Hz
PLEASE READ AND SAVE ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT
WARNING
- to reduce the risk of fire, electrical shock or injury to persons or property, please follow
the guideline below for safe use and installation.
INSTALLATION REQUIREMENTS:
•
Do not exceed the maximum wattage rating
•
Suitability for use “indoors”
INSTALLATION DIRECTION:
•
Check whether the fitting has been damaged during transport. Do not operate/install any product
which appears damaged in any way. Return the complete product to the place of purchase for
inspection, repair or replacement.
•
Take care not to pull wire during unpacking as a bad connection may occur.
•
Ensure all power connection is off for your own safety.
•
Level all the components on a smooth surface and make sure there is no component missing
before assembly.
1. Thread tube (B) clockwise onto base (A) until it is tight.
2. Thread tube (C) clockwise onto Tube (B) until it is tight.
3. Thread lamp holder section (D) clockwise onto tube (C) until it is tight.
4. Thread Centre Pipe (E) clockwise into lamp holder section ( D ) until it is tight.
5. Place the shade ( F ) onto the Center Pipe ( E ), then tighten Finial ( G ) clockwise to secure the
Shade.
