1. Introduction
1.4 Caution(continued)
Handling
1) Do not touch or push on the optical surfaces.
2) If the product is dropped, it may cause damage. Please refer to the illustrations
and the comments from section at 2.3.1.
ESD
1) It is strongly recomended that wristbands and anti-electrostatic gloves be worn
and all devices, equipment and machinery be properly grounded when handling
the LEDs which are sensitive to static electricity and surge.
Thermal management
1) There should be adequate thermal management to prevent the LED die
temperature from exceeding the specified maximum junction temperature.
Cleaning
1) If required, isopropyl alcohol (IPA) should be used.
Eye Safety Guidelines
1) Do not directly look at the light when the LEDs are on.
2) Proceed with caution to avoid the risk of damage to the eyes when examining
the LEDs with optical instruments.
Others
1) The stated information in the application note assumes typical equipment being
operated under normal operating conditions. Additional precautionary considerations
may be required for specialized equipment and/or unique circumstances.
2) Any disassembly of LG Innotek components for the purpose of reverse
engineering without written consent by LG Innotek is strictly prohibited.
3) The appearance and specifications of the products may be changed without
notice.
8
