If you are the Attendant or Secretary, you may activate
Intrusion
. You may also use
Step Call
; dial the next station by
dialing the last digit of the Intercom number.
5.1.2
Leaving a Message Wait
If the called user does not answer or is in DND mode, you may
leave a
Message Wait
. The called user will receive a Message
Wait indication; the message icon will be displayed. If the
Ring/Message LED is set to Message Wait, the LED will flash.
5.2
External Calls
5.2.1
Placing external CO/VoIP calls
External calls are placed on CO/IP lines. These ‗lines‘ are
accessed either using a button on the iPECS Phone assigned as
a
CO/IP line
or using dial codes. The CO/IP lines are grouped
for different types of calls, local, long distance, etc. Using the
CO/IP line group
code, you will be able to access any line from
the group. A Flex button on the iPECS Phone assigned as a
LOOP
button lets you access a line from a group. Dial codes for
access to CO/IP lines are:
Individual CO/IP line access
88 + Line number (01-42 for iPECS-50 & 100, 001-200 for
iPECS-300, 001-400 for iPECS-600, or 001-600 for iPECS-
1200).
CO/IP Group access
—
To Camp-On (wait off-hook) for a busy station:
Press * and await an answer.
To request a Callback (wait on-hook) for a busy station:
Press the C
ALL
B
ACK
button and hang-up.
To make a Voice Over announcement to a busy station:
Dial #,
After the Splash tone is heard, begin speaking.
To activate Message Waiting:
When calling a number that is busy or in DND mode, press the
CALL
BACK button and hang-up.
