tone on top of the existing call, as an indication of another call
waiting.
While busy, certain stations can activate
Voice-Over
to your
phone. In this case, audio is received from both the active call
and the
Voice-Over
announcement at the same time.
Respond to any of these
Off-hook Signals
in one of several
ways; place the existing call on
Hold
and respond to the new
incoming call, activate
One-time DND
,
send a
Silent Text
Message
, or ignore the new call.
Silent Text Message
requires a
TEXT MESSAGE
button (not
available on a SLT or other non-display terminal).
The Attendant or Secretary may use
Intrusion
to announce a
call while you are busy.
4.3
Using Answering Machine Emulation (AME)
When a call is connected to your voice mail, you can screen the
call as if using
a normal Answering Machine. The caller‘s voice
is played over your speaker while the message is being
recorded. There are two methods of notification and call
screening provided, Ring or Speaker mode.
Ring mode
—the Answering Machine Emulation (AME) Flex
button will flash to notify you of a call. You may press the Flex
button to hear the caller as the voice message is stored.
Speaker mode
—when the call is sent to the voice mailbox, the
caller‘s voice is automatically broadcast over the speaker of your
iPECS Phone.
You may terminate screening, leaving the caller in voice mail to
record a message, talk with the caller and record the
conversation in the mailbox, or answer the call and disconnect
the Voicemail. The AME feature is only available when using
the iPECS VMIM/VSF Voice Mail; a M
UTE
and AME button
To answer a Call Waiting:
Press
HOLD
/
SAVE
, and/or
Press the flashing
CO
/
IP LINE
button.
To activate One-time DND:
Press the DND button.
To send a Silent Text Message:
Press the programmed
TEXT MESSAGE
button,
Select the desired message to send.
