57
Replace the Upper Roller Cam
15. Insert the new Upper Roller Cam into the Upper Roller Cam Housing.
16. Insert the Upper Roller Cam Shaft into the new Upper Roller Cam and Upper Roller Cam
Housing.
16.1 Note: Ensure that the Upper Roller Cam Shaft's keyed section is facing the Upper
Roller Cam Pressure Adjuster's bolt hole.
17. Reinsert the Upper Roller Cam Pressure Adjuster onto the Upper Roller Cam Shaft and
tighten its bolt with an Allen key.
18. Reinsert the Upper Roller Cam Housing onto the RTP 9® and tighten the nuts with a socket
wrench.
18.1 Note: The correct tension for these nuts is 70-90 Nm.
