42
Fill Tray
The Fill Tray helps channel the dry materials into the Die bores and also pushes the tablets out
of the way and into the Ejection Tray. This part is designed to wear to avoid damaging the Tooling
and/or Turret, so it may need to be replaced. These instructions also apply to Fill Tray Scraper/
Take-Off Blade removal and replacement.
Tools and Materials Needed
• Set of metric Allen keys with ball ends
• Crosshead screwdriver
• New Fill Tray part
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
WARNING:
To prevent any potential personal injury, ALWAYS unplug the RTP 9®
from the electrical outlet when replacing parts.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
Remove the Fill Tray
1. Open up the Perspex Casing's door to gain access to the Fill Tray.
2. Loosen the Hopper's screws with an Allen key and remove it from the Perspex Casing.
