62
Storing the RTP 10i®
After its thorough cleaning, the RTP 10i® needs to be stored in the proper conditions. It is
important to store it in an environment in which the machine is safe from rusting. The RTP 10i®’s
high traction areas and the Tooling need to be lubricated separately before you store them.
Tools and Materials Needed
• Plastic wrapping to cover machine
• Airtight container for Upper Punches, Lower Punches, and Dies (if in storage for more than a
week)
• Grease gun
• Lubricant/grease (NSF approved lubricant if machine has a high chance of contact with the
food or drug product)
• Disposable latex/rubber gloves (for food grade products and to protect hands from lubricant)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
Lubricating the Tooling
If you are not using the machine for more than a week, store the Tooling in an airtight container (like
the one pictured below) and cover it with lubricant to prevent rust formation. If not, simply lubricate
each part of the Tooling, particularly the heads and barrels of the Upper and Lower Punches, and
reinsert it back into the machine.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this
process.
Lubricating the Main Worm Gear
The Main Worm Gear is mounted above the Motor in the lower section of the tablet press. Visually
inspect the Main Worm Gear's eye glass to see the oil level. Apply WA 460 Oil (0.55 L) whenever it
is dry.
