40
28. Insert a new Lower Punch up through the Lower Punch Retaining Puck's hole and into the new
Die's bore.
28.1 Note: Lubricate the barrel of the Lower Punch.
29. Rotate the Hand Wheel until the next new Lower Punch can be inserted.
30. Repeat steps 28-29 until all the new Lower Punches are inserted into the Turret.
30.1 Note: Manually turn the RTP 10i® Turret for a couple of rotations to ensure that the
new Lower Punches are situated correctly.
31. Reinsert the Lower Punch Retaining Puck with the beveled side facing up.
31.1 Note: Make sure that the Lower Punch Retaining Puck is flat in the hole and not
sticking up.
