43
Force Feeder Wear Plate
The Force Feeder channels the dry materials into the Die bores. This part has a brass plate
designed to wear to avoid damaging the Tooling and/or Turret, so it may need to be replaced.
Tools and Materials Needed
• Crosshead screwdriver
• Wrench set
• New Force Feeder Wear Plate part
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
WARNING:
To prevent any potential personal injury, ALWAYS unplug the RTP
10i® from the electrical outlet when replacing parts.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
Remove the Force Feeder Wear Plate
1. Raise each of the Perspex Casing's doors and lock them into an upward position.
2. Unscrew the Powder Shutoff Gate's bolt by hand and remove the Hopper.
3. Remove the Hopper to Force Feeder Connecting Pipe.
