22
Force Feeder Speed
There is a variable speed control on the lefthand side of the RTP 10i®'s console to adjust the Force
Feeder's speed. The Force Feeder's speed can be increased to address any flow issues with the
powder.
Tools and Materials Needed
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
1. Ensure that the speed control switch is in the START position.
2. Rotate the speed control dial to adjust the Force Feeder's speed.
2.1 Note: To increase the speed, turn the dial clockwise. To decrease the speed, turn the dial
counterclockwise.
WARNING:
To prevent any potential personal injury, unplug the RTP 10i® from
the electrical outlet.
