27
Powder Flow
If there is an overflow of powder or if the formulation is not moving fast enough, there is a flow
adjustment panel in the Hopper to address any flow issues.
To watch a video of powder flow adjustment, go to
https://www.lfatabletpresses.com/rtp10i-
adjusting-formulation-flow
Tools and Materials Needed
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
1. Raise each of the Perspex Casing's doors and lock them into an upward position.
2. Rotate the flow adjuster to change the powder flow.
2.1 Note: Turn the flow adjuster clockwise to decrease the amount of powder flowing
into the Force Feeder; completely tightening the flow adjuster will stop all flow. Turn
the flow adjuster counterclockwise to increase the amount of powder flowing into the
Force
Feeder.
WARNING:
To prevent any potential personal injury, unplug the RTP 10i® from
the electrical outlet.
