TIAMIS-800 wireless radio transceiver
User Manual. Ver. 1.3
DOUM0003AA
Page 32 of 35
Appendix A. Settings used by the transceiver.
All settings used by the transceiver are listed below in the Table A-1.
Table A-1. Settings used by the transceiver
RS232 data port control
Parameter
Meaning
Notes
BaudRate
RS232 baud rate.
DataBits
RS232 data bits.
Parity
RS232 data parity.
StopBits
Number of stop bits for RS232 data
protocol.
FlowControl
Used to set a desired type of flow
control.
Not activated.
CTSFlooring
Upper limit of the number of bytes
left in the RS232 input buffer before
CTS line gets de-asserted.
CTSCeiling
Lower limit of the number of bytes in
the RS232 input buffer before CTS
line gets re-asserted again after being
de-asserted.
HoppingTable options
Parameter
Meaning
Notes
FrequencyChannel #
Frequency channel number to be used
by the transceiver.
Primary HoppingPattern
Selection of the primary hopping
pattern to be used by the transceiver.
SecondaryHoppingPattern
Selection of the secondary hopping
patterns to be used by the transceiver.
HopTableLength
The length of the HopTable to be used
by the transceiver.
