TIAMIS-800 wireless radio transceiver
User Manual. Ver. 1.3
DOUM0003AA
Page 34 of 35
Table A-1. Settings used by the transceiver (Continued)
Timing defining parameters
Parameter
Meaning
Notes
MasterSlotBytes
Determines how many bytes will be
allocated for an RF packet for
transceiver(s) operating in the Master
mode.
SlaveSlotBytes
Determines how many bytes will be
allocated for an RF packet for
transceiver(s) operating in the Slave
mode.
RoundTrip_usec
Used to adjust the round trip timing
on the transceiver.
Not activated.
SystemSloltBytes
The SystemSlot is always added at the
beginning of the Frame0 in the Frame
Table. The duration of this slot is
determined by this parameter.
Transmission control
Parameter
Meaning
Notes
FramesToWait
Determines how many frames the
Slave transceiver will wait before it is
allowed to transmit an RF packet.
TimeoutRetries
If the transceiver does not receive RF
packets from the radio it is
communicating to for longer than
TimeoutRetries
consecutive frames,
then the transceiver will timeout and it
will drop the link.
PacketRepeat
It determines a number of additional
copies of each RF packet the
transceiver will send out.
BytesThreshold
It determines the minimum number of
bytes the Slave transceiver needs to
have in its input data buffer before it
is allowed to transmit an RF packet.
