Lexus CT MoveOn NAVI, Owner'S Manual

Page: 31 / 98

MoveOn Navi 29
6.4 Frequent destinations
If you often make trips to the same destinations, you can set your Lexus CT MoveOn Navi device to
ask if you want to plan a route to one of these locations every time the device starts. This is faster
than planning a route in the normal way.
6.5 Show my frequent destinations
You can set your MoveOn device to ask if you want to plan a route to one of your frequently visited
destinations every time the device starts.
To change this setting, do the following:
1. Select ”Start-up preferences” in the Preferences menu and then select ”Ask for a destination”.
2. Select ”Yes”, then select ”Yes” again to begin entering information about the destination.
3. Select a symbol for the destination and select ”Done” to set the symbol, then select ”Yes”.
Tip: To add new destinations, select one of the numbered symbols and enter a name for the
new destination button.
4. Select ”Yes” and if required enter a new name, then select ”Done”.
5. Enter the address details in the same way you enter an address when planning a route, then
select ”Done”.
6. If you want to set more destinations, repeat the steps above. Otherwise, select ”Done”.
7. You are asked if you want to change the start-up image.
8. If you want to change the image, select ”Yes” then follow the instructions shown on the
screen. Otherwise, select ”No”.
Every time your device starts, you are asked if you want to plan a route. If you select ”Cancel”, the
Driving View opens.